Successful installation of the window is only part of the installation process, since the concentration of heat inside the room and the optimal level of comfort directly depend on the quality of incorporation of the structure. In addition to practical indicators, the external performance of the window opening will also noticeably change. The ability to properly close the windows after installation will save not only the penetration of cold air from the street, but also eliminate the formation of fungi, mold and an unpleasant smell of dampness.
Outdoor Prep
It is necessary to close the slopes both from the inside and from the outside, in order to avoid the disastrous consequences of the flaw. Under the influence of environmental factors, the layer of polyurethane foam will undergo destruction and will quickly lose its functionality. For this reason, external work is given priority and only after they are completed are accepted for interior decoration..
Before proceeding with the installation, it is necessary to determine the materials that will become the basis of the slope. As external elements, plastic panels or the plaster method are often used.. Similar materials are used for interior work, where the choice is greatly expanded, including sandwich panels, wood or drywall.
Before closing the window, all empty spaces must be carefully filled with foam. After this, waterproofing materials are applied and the structure is allowed to dry and settle. Before embarking on the termination work, bring the installed structure in order and treat it with the antifungal drugs that are used during installation.
Close up windows with stucco
The plastering method is widespread both among experienced professionals and lay professionals. The popularity of plastering is explained by the low cost of consumables and good quality compared to other methods. There is also a small minus for this type of finish, which consists in a lot of time. To get really good results, the craftsmen will have to sacrifice some amount of time. However, labor costs will result in a successful completion.
By average standards, plastering on the external slopes will take from 2 to 3 days, since each of the applied layers of the mixture should dry well before applying the next. Be sure the first and second layers are made with a heat-insulating compound, which you can buy at every specialized store. The interlayer is very important for maintaining heat in the house, which is especially important for regions with low temperatures. The third layer - the last one - is applied with the usual stucco mixture. Once the slopes are dried up, you can safely engage in grinding and painting the surface in the desired colors.
Close up with plastic
Finishing slopes with plastic materials is a great option to achieve quick, decent quality results. Universal plastic will help close small defects or errors made during installation. Plastic slopes can be freely bought in almost every hardware store with a wide selection of colors. True, they will cost higher than plaster.
To install such a panel, first you need to adjust it by cutting to the desired size and attach it with mounting adhesive, and fill the joints with silicone sealant. Simple installation does not require knowledge of specialized skills, and the panels themselves have a high service life and do not require special care.
Close up the internal slopes
Interior decoration of windows needs to be paid great attention, since not only the level of comfort and reliable protection from the environment, but also the aesthetic component will depend on the quality of execution. Try to carry out work with high accuracy so that the result is pleased with a presentable appearance.
Drywall Application
This material is one of the most affordable price options that meets the requirements of environmental friendliness. It copes with the conservation of heat indoors and looks attractive from the outside. The disadvantage will be the difficulty in installation, since the formed joints will have to be carefully shut up. The installed drywall must be puttied and painted. When choosing this material for decoration, give preference to moisture-resistant species. Before fixing the sheets, it is desirable to make a layer of glass wool in order to increase the thermal insulation properties.
Sandwich Panels
Sandwich panels consist of two PVC sheets, the filling of which contains polyurethane foam with a high thermal insulation function. The material has a high level of comfort with excellent heat retention. Installation of sandwich panels is carried out using profiles under which the isover is laid. The technology in many ways resembles the installation of slopes made of plastic and is simple to execute. The thickness of the structure is 10 mm, and the material itself has a long service life.
Plastic option
The demand for plastic seals is explained by harmonious execution due to the ability to choose the same color and structure of materials similar to the color scheme of the window opening. The panel easily fits onto special glue, but first the surface must be laid out with isover. Upon completion of the work, carefully close the openings with silicone sealant.
Technology for closing windows with plastic slopes
Since plastic slopes are very popular due to the simplicity and accessibility of execution, we will consider in more detail the front of work and the principle of installation of the structure.
To begin with, it is necessary to remove the remnants of the mounting foam from the work surface, treat the openings with an antifungal drug and apply a layer of waterproofing. Pay attention to the closing of the window under the windowsill: the free space must be carefully filled with foam to prevent further blowing.
The start profile must be attached around the perimeter of the window frame, and on the outside, position the rail. This is an important mounting part for mounting slope profiles.. This can be done with the brackets of a building stapler. Be sure to check the thickness of the rail: if there are slight deviations, apply a thin lining.
Next, the panels need to be placed between prepared profiles. You need to start work on the upper side of the window box, moving to the lower ones. First, the plastic is introduced into the start profile and is well fixed, after which you can use sealant.
Before you begin fixing the second side of the plastic, a layer of mineral wool is laid under it. Such a step will improve the function of sound and heat insulation. Having successfully attached the slopes along the top of the window, you can install the side panels in a similar way. At the end of the work, the joints and the connection strip with the windowsill are covered with a thin layer of liquid plastic, and the excess is carefully removed.
Even an inexperienced master can close the windows after installation, since the methods are simple to execute and do not require high labor costs. Ready-made designs made of plastic or using plaster will please with a neat appearance and reliability. It is only important to adhere to the technology and stock up on knowledge of how to properly and efficiently close a window.