Ariston geysers are the products of the Italian brand of the same name, they have been popular in Russia since the 90s. Affordable value, attracting Russian consumers, is achieved through the placement of production facilities in China. The equipment is adapted to specific operating conditions - the possibility of a reduced water pressure and its increased stiffness is taken into account. Ariston instantaneous water heaters have a wide range of performance - the brand presents a lineup in which you can find an option for any need - from low-power versions to models that can serve multiple water intake points simultaneously.
About company
Ariston is an Italian brand that has been supplying Europe with gas equipment for hundreds of years. The company's products are famous for quality, the assortment of a variety of household appliances - from dishwashers to water heaters. Location of the headquarters - Fabriano. After rebranding in 2005, the name of the company changed to Indesit Company. In addition to Ariston, this concern owns the brands Hotpoint, Indesit and Scholtes. Today Ariston ranks third in the global ranking of sales of household appliances.
What do Ariston models have in common?
Ariston gas equipment supplied to Russia is assembled in China. The transfer of production facilities favorably affected the cost of the speakers, and their parameters fully comply with European quality standards. Products are distinguished by reliability, maintainability and thoughtful design. Common to all brand modifications:
- Simple classic design.
- Compact design.
- Equipped with security systems. There are gas control, traction and temperature sensors, protection against overheating. The system allows you to prevent an emergency in case of any malfunction in the water supply and gas supply.
All equipment that goes on sale has test settings - they are put up for production in accordance with standard operating parameters. After purchasing the equipment, each owner can adjust it in accordance with specific parameters of pressure and pressure. You can do this yourself - just read the instructions. If in doubt, contact the after-sales service - specialists will professionally perform the setup. This will not only ensure effective and comfortable operation of the device, but also extend its service life.
Pros and Cons of Ariston's Columns
Benefits:
- Silent work. When firing up and working, there are no extraneous sounds and clicks.
- Temperature stabilization in different modes.
- The copper heat exchanger is durable, resistant to temperature extremes and scale.
- Production and assembly are performed using European technology.
- Spectacular design.
Disadvantages:
- Shutdown when the pressure in the tubes of water supply decreases. This minus is especially noticeable on the last floors of apartment buildings.
- There is doubt about the durability of components - the Chinese assembly affects.
- The high cost of spare parts. If the equipment breaks down, it is more profitable to buy a cheaper analogue from lesser-known manufacturers than to replace a failed node.
When choosing a model, consider the needs for volumes of hot water, the number of water intake points and your budget. The price of inexpensive versions is up to 10,000 rubles. But they are not durable. To purchase a reliable column with wear-resistant components, you need to pay an order of magnitude more.
Model Overview
Ariston Fast Evo Series
There are two modifications with a capacity of 11 and 14 liters per minute, respectively Fast Evo11b and Fast Evo 14b. These are automatic columns with electric ignition - to maintain the function you need two batteries, which last for a couple of years. Temperature constancy is maintained by a flame modulation system. Distinguish devices:
- Type C. Here the front panel is equipped with a digital display - to control the set parameters. If the settings are incorrect, the screen will display an error code - by looking at its value in the instructions, the user adjusts the device to specific parameters. Management - push-button.
- Type B. There is a mechanical handle - switch the temperature mode.
Advantages of the 11b modification:
- It works on two points of water intake.
- Ignition at minimum pressure.
- Stable outlet temperature.
Cons 11b:
- Unpresentable design.
- Users note a buzz with a small flame, which disappears when fully burned.
Advantages of modification 14b:
- Stylish design.
- Minimum adjustment - only one temperature setting is set.
- Temperature stability.
- Quiet ignition.
Cons 14b:
- Battery Replacement.
Marco Polo Series
The series is represented by two models - Gi7S and M2. Both are discontinued. Flowing heaters. Turbocharged system. No chimney. Closed combustion chamber. The pipe is led out into the street - the removal of combustion products occurs through a window or hole made in the wall. Installation of such devices is carried out after appropriate permission issued by gas supervision. Both models have an open combustion chamber. The power of the Gi7S polo is 22 kW, M2 is 18 kW. Productivity, respectively 11 and 10 l / min. Such devices are valuable for rooms without a stationary chimney. The disadvantage of this series is its volatility. The fan is powered from 220 V.
DGI 10L CF Superlux
Budget version. Assembly - Russian. Mechanical control. Automatic electric ignition - need batteries. Productivity - 10 l / min. Estimated cost of 7,000 rubles. Technical specifications:
- The maximum heating is 75 ° C.
- Power 19 200 watts.
- There is a gas control system. Overheat protection.
- Chimney type.
- Gas consumption - 2 cubic meters. m / h
It can work on any type of gas - natural or liquefied. There is a switch "winter-summer". Wall mount. Vertical layout.
Storage heaters
Accumulative water heaters are represented by two modifications:
- Ariston SGA 200.8 650 W Open combustion chamber. Heating +75 ° C. The capacity of the tank is 195 liters. It is kindled automatically. There are indicators - heating and inclusion. There is a thermometer. The container inside is enameled. It works on any type of gas. Protective gas control system. Vertical installation. Floor type. Magnesium Anode Dimensions - 49.5 × 170x35 cm.
- Ariston SUPER SGA. Capacity 100 liters. Dimensions 95 × 49.5 × 51 cm. Tank coating, installation and other points are similar to the previous model.
Italian storage water heaters with natural draft provide the house with hot water for any consumption and regardless of the temperature of the incoming water. They are used both in everyday life and in industry. Pluses of SUPER SGA:
- Adaptation to Russian conditions - they work stably at low parameters of gas pressure and pressure in water supply pipes.
- Highly resistant enamel on the inner surface of the tank is an exclusive development of the company.
- Three security devices. The water heater is equipped with a thermocouple, temperature and smoke sensors.
- Serial or parallel connection.
- Fuel economy.
- Effective thermal insulation - reduces heat loss by 20%.
- Magnesium Anode
- Piezo ignition.
- No power connection.
- Strong steel case.
- There is regulation and indication of temperature.
Malfunctions
Do not rush to send the device for repair to a service center, some problems are solved independently. For example, replacing batteries. The nature of the malfunctions can be judged by the number of blinks of the indicator:
- A steady light indicates that it is time to replace the batteries.
- A single flash of the indicator indicates a malfunction of the microswitches.
- Double flashing of the indicator indicates the need to replace the temperature sensor.
- A triple flash indicates that there is no flame during ignition - the ignition electrode and the sensor monitoring the flame are suspected.
- Four flashes of the indicator indicates a malfunction of the gas valve.
- Five flashes indicate overheating. Check the condition of the chimney.
How to repair a water heater?
The duration of the gas columns is affected by the quality of the water. With minor problems, you can cope with the repair on your own. Classic malfunctions of gas-fired water heaters:
- The device does not turn on or off after a short time - “symptoms” indicating that scale has accumulated in the heat exchanger. It is necessary to clean with a special tool.
- I can’t get hot water at the outlet - the radiator must have leaked. Another option is incorrect adjustment of the water or gas supply.
- The burner does not light. Check the draft - the chimney may be clogged.
Prevention and troubleshooting
If you use moderate heating - up to 40-45 ° C, you can avoid scale in the radiator. If the problem could not be avoided, you will have to clean the radiator. To wash it, you will need tools: screwdrivers - flat and Phillips, open-end wrenches, gaskets and a hose, special descaling powder (you can use vinegar). Cleaning technology:
- Remove the cover and accessories.
- Shut off the water supply at the entrance. Open the nearest warm water faucet.
- Twist the feed tube from the radiator, take it to the side.
- Pour about 1 liter of water from the heat exchanger.
- Put a hose on the radiator inlet - pour the descaling compound through it. This should be done gradually. Cleansing takes 3-4 hours. To speed up the process, you can heat the active substance by turning on the igniter.
- At the end of the cleaning, the liquid is drained. The scale will come out - the pressure will increase.
A radiator is an expensive element. Its replacement is a costly affair. If there is a leak, the heat exchanger can be sealed with solder at 180 ° C. Need a 0.1 kW soldering iron. Often a leak appears on the outside of a heat exchanger made of cheap material. The microcrack is smoothed out with sandpaper, wiped with a rag and solvent and sealed. Before soldering, the water is lowered, blowing out the remaining drops with a compressor or vacuum cleaner.
Reviews
SUPERLUX DGI 10L: Vladimir L., Tuapse
Simple and cheap. Enough for one mixer, if you turn on the second, the water cools. You will not find spare parts - a one-time thing. She worked a year and a half, maybe she would have worked to this day, but they are to blame themselves - they mixed the hot and cold stream in the mixer. The installers did not warn us that this was prohibited, and we lost the instruction, making repairs in the apartment. As a result, the heat exchanger simply crumbled. We did not find a heat exchanger, so you have to buy a new heater - better and more expensive.
SGA 100: Mikhail Z., Chudovo
Of the benefits - quiet operation, no buzz. Convenient to use. Stably hot water - no drops. The design is simple, so there’s nothing to break particularly. The disadvantage is that there is no inspection hole for cleaning. Having such an apparatus, you do not feel the lack of a central water supply. Replacing the groove with a storage heater, I got rid of the “cold-hot” problem. You can open two taps at once. Comfort, however, required torture - a fire act, a new chimney, a visit by gas workers. Almost the same amount should be added to the price of the apparatus - I had to spend money on a plug-in chimney with a chimney, as well as on installation and start-up.
Budget Ariston columns do not cause delight among users. The equipment of economy class from the Italian manufacturer does not pamper the domestic consumer with quality and uptime. The equipment, distinguished by a low cost, significantly surpasses analogues from Chinese manufacturers in quality. At the same time, for the same amount you can find a good European assembly column from no less famous brands.