Over time, parts of the Miele washing machine wear out, unexpected breakdowns occur. How to extend the life of the washer? Repair or replace defective items.
To determine which element of the SM failed, self-diagnosis of the machine will help. When a malfunction is detected, it immediately displays an error code on the display. Be careful - and you will understand how to fix the damage with your own hands.
Codes of malfunctions of cars Miele (Mile)
Error code | What means | Causes of occurrence | How to fix the situation |
F01 | Drying temperature sensor defective. | Due to a short circuit, the thermistor that controls the drying temperature is out of order. |
|
F02 F03 F04 | An error means that a problem has occurred with the drying temperature sensor. | Why is the code on the SMA display:
| To reset the error:
|
F10 | There was a problem while filling the water. | The reasons:
| To solve the problem, do this:
|
F11 | There is no discharge of water. | For what reasons the code was displayed on the screen:
| How to remove the error:
|
F15 | Hot water intake. | Check if the connection is correct. Turn off the hot water supply. | |
F16 | Too much foam. |
| What to do:
|
F19 | Water sensor malfunction. | Sensor Inspection. A small object may be caught. | |
F20 | Failure in the heating system. | Why the error code was displayed in the Miele washing machine:
| How to fix the situation:
|
F29 | Damage to the drying heater. | TEN drying does not work. | Replacing the heating element. |
F34 | The hatch does not close tightly. | Why the washer gives an error:
| How to repair a Miele washing machine:
|
F35 | Unable to open the hatch door. | What happened:
|
|
F39 F41 F43 F45 F50 | Electronics malfunction. Problems with the control module. | Change or repair of the main unit. | |
F46 | Incorrect display connection. | Broken contacts or broken control board. | Repair and change of items. |
F47 | There are problems with the BAE / SLT interface. | ||
F48 | There are problems with the SLT interface. | ||
F51 | Faulty pressure switch. | There is a problem with the pressure switch. | Installing a healthy item. |
F53 | The speed sensor is out of order. | Damage to the sensor. | Replace item. |
F55 | Incorrect operation of the time control element of the AGR. | Change of detail. | |
F56 | Reduced speed (do not reach 400 rpm). | The engine tachometer is probably broken. | Checking the winding and the tachometer itself. |
F62 | The mode selector does not work. | Installing a new selector. | |
F63 | Problems with the operation of the system that controls the path of the water. | Check and repair the system. | |
F64 | The path sensor is out of order. | Sensor change. | |
F65 | The backlight in the drum is defective. | ||
F81 | The drying unit does not work. | Replace the drying unit with the CMA Mile. | |
F83 | Drying temperature exceeded normal. | The thermistor may have broken. | Checking the thermistor and heater. |
F92 | There is a high probability of damage to the washing machine with a fungus. | ||
F93 | Damage to the relay of the additional unit. | Repair, change of relay. | |
F96 | Alternative water supply does not turn on. | Checking items. | |
F100 | Lost Communication With IK6. |
Considering the data in the error table, you can try to repair the Miele washing machine yourself without resorting to the help of a wizard.