If you find error F59 on the display of a Bosch machine, you need to check the 3D sensor. In this article we will analyze what you can do yourself without calling the wizard.
Today, the Bosch washing machine is a guarantee of high-quality and durable washing. However, not a single machine is safe from breakdowns. And if SM Bosh is broken, do not blame the manufacturer ahead of time. On the contrary, he made sure that you were the first to know about the breakdown and urgently take action.
To do this, the error codes on the screen light up. To find out what a particular code means, just look at the instruction manual. But what to do in this case is not always written in the manual.
You will need some advice on how to fix the situation.
Decryption, causes and signs
If SM Bosch shows error F59, then the 3D sensor (sensor) is out of order. The first and almost the only sign is that the AGR does not finish the washing program.
When the machine shows error code 59 on the display, a number of reasons can contribute to this:
- An error has occurred in the electronic controller (control board).
- The circuit board went off.
- 3D sensor out of order.
- SoftWare Error.
Check and repair
The first thing you can do if the Bosch washing machine gives an F 59 error on the display is to restart it. To do this, unplug the washer from the network and let it “rest” for 15-20 minutes. Perhaps in this you will find a solution to the problem.
Repair CM Bosch with error F59
Service center wizards know how to fix a failure. In order to reset errors, they perform one of the following actions:
- Check the wiring of the 3D sensor. The contacts may have burned out or oxidized, and because of this, F59 is lit on the electronic screen.
- Eliminate a firmware error on the control board. To do this, specialists reprogram the electronic module.
- They check the circuit board of the board, its integrity is possibly violated.
Understanding how to fix the malfunction is not enough to conduct an independent repair. If you could not remove the error by rebooting, and the code is displayed again, then you need to proceed with serious actions.
An untrained user is unlikely to be able to independently carry out any of the above actions. Therefore, call the wizard to repair faulty components.
The main thing that you know what F59 means is all that remains to find an experienced specialist and to entrust him with repairing the Bosch washer.